Catalina USB网卡驱动

官方介绍

Support macOS Catalina 10.15, macOS Mojave 10.14, macOS High Sierra 10.13, macOS Sierra 10.12, OS X El Capitan 10.11, OS X Yosemite 10.10, OS X Mavericks 10.9

  • Update 29 Nov 2019 new drivers for macOS Catalina 10.15

Drivers for Realtek 802.11n and 802.11ac USB Wi-Fi adapters

For macOS Catalina 10.15

  • Working with SIP Enable but you need the Gatekeeper disable

Known Working and testing adapter

  • Archer T2U NANO
  • Archer T3U
  • ArcherT4U V3
  • Archer T9UH V2
  • ASUS USB AC68
  • EDIMAX EW-7722UTn V2
  • EDIMAX_EW-7822ULC
  • EDIMAX N300
  • EDIMAX EW-7811Un
  • Linksys WUSB6300
  • Linksys WUSB6400M
  • Netgear A7000
  • Sitecom WLA7100
  • TL-WN823Nv3
  • TL-WN823Nv2
  • TL-WN725Nv3
  • TL-WN723Nv3
  • TL-WN722Nv3
  • TL-WN821Nv6
  • TL-WN822Nv5
  • TRENDnet N150 Micro

Support Drivers:

View list

You need a UEFI or ESP Clover installation to use this program, this does not install Clover, it will install only both kext RtWlanU1827.kext, RtWlanU.kext in the Other folder.

View ➣ ➤ You must have set injectkexts to Yes in the Clover config.plist

This driver runs from macOS Mojave 10.14 to macOS Catalina 10.15. The system is required to reboot after the driver is installed, so please close all the other applications before installing this software. After the system boots up and you enter the system, please follow the following steps to configure the network:

  • Instructions:
  1. Connect to the WLAN from the status bar Icons.
  2. Select the “System Preference” from the system menu.
  3. Select and launch the “Network” item in the “System Preference” folder.
  4. From the “Configure” list, select the correct adapter and configure it.
  5. Configure the settings.
  6. Click the “Save” button.
Catalina USB网卡驱动

花开彼岸,莫语来生
花落处 » Catalina USB网卡驱动

发表评论